Perfect Product

gps review STREAMLIGHT Safety Stinger PolyStinger TT 3C

This Bipod fits perfect on my Ruger 10 22 barrel. On the top side of the bipod there is a spring loaded durable metal clip which you push to release the clamp. Inside the clamp there is some black padding that is installed into the bipod clamp that helps extremely well to protect the barrel. The padding is not noticeable when you clamp the bipod on the barrel. In the picture there is a screw that hangs down and a round metal wheel which sits horizontal. When you clamp the bipod on your barrel you turn the horizontal wheel which tightens the bipod on the barrel. This is all you have do to install the bipod. When you twist the lower extension screws on the bipod legs there is an internal loaded spring that allows the legs to pop right out which gives you about three more inches of height. On the end of the legs there are rubber feet which are durable. The two pins in the middle of the bipod are also spring loaded. You pull up on the pins and can easily fold up the bipod legs. The bipod feels well made and is all metal (other than feet). When I tested the bipod at the range it stayed put forward and back on the barrel however it does turn left and right when you put some moderate pressure by twisting the stock. This motion did not scratch the barrel because of the inner pads installed on the bipod. The twisting motion was not an issue at all. Overall the bipod fits great and stays put. I put hundreds of rounds through my 10 22 and was very satisfied with this bipod. I would recommend to a friend.

Get your STREAMLIGHT Safety Stinger PolyStinger TT 3C Now!